White Color Temperature - Philips 107X User Manual

107X Product Information
• Tube type
• Phosphor
• Recommended display area
• Maximum display area
SCANNING
• Horizontal scanning
• Vertical scanning
VIDEO
• Video dot rate
• Input impedance
- Video
- Sync
• Input signal levels
• Sync input signal
• Sync polarities

WHITE COLOR TEMPERATURE

Chromaticity CIE coordinates:
• at 9300 degrees K
• at 6500 degrees K
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital
cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible
device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you
can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a
predefined setting as well as the color gamut. Therefore it is important to select the sRGB setting in the
monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down button to
go to Color temperature and press OK again. Then move the down button to go to sRGB and press OK
again.
Exit this OSD.
file:///D|/EDFU/LF3/lf3manual/english/107X/PRODUCT/PRODUCT.HTM (6 of 9) [2003/3/27 ?? 11:36:04]
Shadow mask, Real Flat, high contrast, anti-glare, anti-static, anti
reflection, light transmission 45%
P22
12.0" x 9.0" / 306 x 230 mm
12.8" x 9.6" / 325 x 244 mm
30 - 71 KHz
50 - 160 Hz
108 MHz
75 ohm
2.2 kOhm
0.7 Vpp
Separate sync
Composite sync
Positive and negative
x = 0.283 / y = 0.297
x = 0.313 / y = 0.329