Philips 105S61 User Manual

15" -inch (14.0" vis) color monitor
Hide thumbs Also See for 105S61:

Advertisement

Safety and Troubleshooting Information

Safety Precautions and Maintenance
Safety precautions and maintenance
WARNING: Use of controls, adjustments, or procedures other
than those specified in this documentation may result in
exposure to shock, electrical hazards, and/or mechanical
hazards.
Read and follow these instructions when connecting and using your computer monitor:
Disconnect the monitor from the power supply if the monitor is not to be used for an
l
extended period of time.
Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The
l
back cover should only be removed by qualified service personnel.
Do not place objects on top of the monitor cabinet, objects could fall into vents or cover
l
them and prevent proper cooling of the monitor's electronic devices.
To avoid the risk of shock or permanent damage to the set, do not expose the monitor to
l
rain or excessive moisture.
Do not use alcohol or ammonia-based liquid to clean the monitor. If necessary, clean with
l
a slightly damp cloth. Disconnect the monitor from the power supply before cleaning.
When positioning the monitor, make sure the power plug and outlet are easily accessible.
l
Consult a service technician if the monitor does not operate normally when operating instructions
of this manual are followed.
Troubleshooting
RETURN TO TOP OF THE PAGE
Regulatory Information

Advertisement

Table of Contents
loading

Summary of Contents for Philips 105S61

  • Page 1: Safety And Troubleshooting Information

    Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them and prevent proper cooling of the monitor's electronic devices. To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or excessive moisture.
  • Page 2 Other Documents You May Need About This Guide This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes the monitor's features, setup, operation and all other information, which is the same exact information described in our printed version.
  • Page 3 ©2004 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V. RETURN TO TOP OF THE PAGE...
  • Page 4: Product Information

    105S69 TUV-Bauart 105S6 15" -inch (14.0" VIS) color monitor with excellent front of screen performance Autoscan covers horizontal frequencies up to 54kHz offering a maximum resolution of 1024 x 768 Flat square high contrast CRT with high-resolution 0.28 mm dot pitch...
  • Page 5: White Color Temperature

    • at 6500 degrees K Automatic Power Saving If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or other input device is detected, the monitor will automatically "wake up".
  • Page 6: Pin Assignment

    Ground R-Ground G-Ground B-Ground Views Follow the links to see various views of the monitor and its components. Front View Rear View RETURN TO TOP OF THE PAGE 0° to 40°C / 32° to 104°F -25° to +65°C / -13° to +149°F...
  • Page 7: Installing Your Monitor

    Installing your Monitor Front View • Rear View Front View Power Switch Power Indicator Menu Contrast Brightness Exit Rear View RETURN TO TOP OF THE PAGE...
  • Page 8 1. Power in - attach power cable here. 2. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC. RETURN TO TOP OF THE PAGE...
  • Page 9: Description Of The On Screen Display

    Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors directly through an on-screen instruction window. The user interface provides user- friendliness and ease-of-use when operating the monitor.
  • Page 10 RETURN TO TOP OF THE PAGE...
  • Page 11 The OSD Controls Description of the On-Screen Display Brightness: Brightness is the overall intensity of the light coming from the screen. A 50% brightness is recommended. To adjust your screen's brightness, follow the steps below. Contrast: Contrast is the difference between the light and dark areas on the screen. A 100% contrast is recommended.
  • Page 12: Adjusting The Picture

    5. When the OSD window is active, it shows the input signal timing. The "H" stands for the horizon frequency and "V" for the vertical frequency. 6. To exit and save, either press the Exit Key, or leave the monitor alone for 10 seconds. If you wan adjust any other function, repeat steps 2-4.
  • Page 13: Select Language

    R.B GAIN controls to obtain your optimum whiteness level. Degauss If color impurity occurs when moving or swiveling the monitor, press the Shuttle Knob and degauss to fix the picture condition. Moiré Reduce Moiré is the result of interference between the phosphor layout and the video signal.
  • Page 14: Customer Care And Warranty

    Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria Germany • Greece • Finland Norway • Portugal • Sweden EASTERN EUROPE: Czech Republic Bulgaria LATIN AMERICA: Antilles Paraguay • Peru • Uruguay PACIFIC: Australia •...
  • Page 15: Frequently Asked Questions

    What does the "Designed for Windows" logo signify? The "Designed for Windows" logo means your Philips monitor fulfills the requirements and recommendations of the PC9x (97, 98, or 99) System Design Guide and passes stringent WHQL tests. What is USB? Think of USB as a smart plug for PC peripherals.
  • Page 16 Go to 'My Computer' and select 'Control Panel' followed by 'Monitor Control.' Select "All default selection' and choose your Philips monitor model from the default driver list. Plug and Play will automatically enable the EPA tick box for you. In DOS or Windows 3.1, you must first make sure...
  • Page 17 "Refresh rate" describes the number of times an entire screen is vertically scanned each second. In other words: If a monitor's refresh rate is 85 Hz, its screen is refreshed - or vertically scanned - 85 times per second. A higher the refresh rate means better image stability and less flicker. A high refresh rate helps users who work long hours in front of a monitor avoid eye fatigue and stress.
  • Page 18 14. Why does my monitor display "Out of Range"? The video card installed in your computer may be too high for the monitor 's specifications. Please contact your computer manufacturer for details on how to lower resolution for your operating system.
  • Page 19 This is an intentional design and is an industry standard, not just for Philips monitors. Please be aware that not all models in the Philips range has this manual degauss function. Some models are built with an auto degauss feature which automatically degausses the monitor when it is switched on.
  • Page 20 25. Why does the picture disappear after I press the on/off button quickly? This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds between powering off and on your monitor, your picture will then be restored.
  • Page 21 L M N O P Autoscan A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card. An autoscan monitor can thus operate with a wide range of video cards. MultiSync, a registered trademark of NEC, provides a similar function.
  • Page 22: Color Temperature

    A way of describing the color of a radiating source in terms of the temperature (in degrees Kelvin) of a black body radiating with the same dominant frequency as the source. Most Philips monitors offer the possibility of setting the color temperature to any desired value. Contrast The ratio between the brightness of the brightest and darkest parts of a picture.
  • Page 23 TV and monitor picture tube. CustoMax Philips proprietary monitor control software that allows users to control parameters (e.g., Size, Color, Geometry) using software running in Windows. CustoMax is compatible with existing VGA cards.
  • Page 24: Digital Control

    This is a very advanced feature that allows the user to switch to any required mode at any instant without having to spend time readjusting the picture. It is currently available in most Philips monitors. Dot pitch The shortest distance between two phosphor dots of the same color on the screen.
  • Page 25 MPR-II defines maximum permitted electrostatic, magnetic and electric field levels measured at a distance of 50 cm from the center of the monitor (see table).
  • Page 26 - contributing to eye strain, headaches, visual blurring, stress, etc. The problem can, however, be eliminated by increasing the refresh rate (number of frames/second) of the monitor to a value above around 70 Hz. Sensitivity to flicker appears to diminish with increasing age.
  • Page 27 See Dot pitch. Horizontal scanning frequency Also called line frequency and expressed in kHz, it is the number of video lines written on the screen every second (from left to right). The higher the horizontal scanning frequency, the better the resolution (i.e., the higher the resolution and/or the higher the refresh rate). RETURN TO TOP OF THE PAGE INF File INF file (Information File)
  • Page 28: Line Frequency

    Linearity The degree to measure the actual location of a pixel on the screen corresponds with its intended location. ( see figure ) Line frequency See Horizontal scanning frequency. Low-emission monitor A monitor that complies with international standards on radiation.
  • Page 29 A fringe pattern arising from the interference between two superimposed line patterns. In a monitor it comes from the interference between the shadow mask pattern and the video information (video moiré), and between the shadow mask pattern and the horizontal line pattern (scan moiré).
  • Page 30 Non-interlaced See Interlaced/non-interlaced. OSD (On Screen Display) The feature that allows an end user to adjust screen performance and parameters of monitors directly through an on-screen instruction window. See CustoMax in CrystalClear section. Overscan The practice in which areas without useful video information are scanned outside the visible screen area in order to make maximum use of the screen for display of active video information.
  • Page 31: Refresh Rate

    (the size of the triad). Thus, a monitor with a large electron spot covering several triads can exhibit poor resolution even though its dot pitch is small.
  • Page 32: Rotation Function

    Rotation function The feature that allows users to adjust the whole screen rotating to be horizontal. Because of the magnetic field of earth, the screen of monitor will be tilt when the screen faces toward the different direction. RETURN TO TOP OF THE PAGE...
  • Page 33: Self-Test Function

    AGRAS (Anti-Glare anti-Reflection Anti-Static) coating. A combined anti-reflection, anti-glare, anti-static coating. Self-test function A monitor equipped with hardware or software to automatically detect cable connection status. Shape Deviation of a reproduced picture from its intended shape. The following types of distortion are...
  • Page 34: Tilt Function

    SOG (Synchronization On Green) A properly functioning color monitor requires five kinds of signals: horizontal sync pulse, vertical sync pulse, red color signal, green color signal and blue color signal. Signals from a PC are transmitted to a monitor using one of three methods: 1.
  • Page 35 With TTL driving, the red, green and blue signals can only be switched on or off or provided with an intensity signal. A TTL-driven monitor can thus display a maximum of 64 colors. Video standards such as MDA, CGA and EGA are based on TTL level.
  • Page 36: Video Dot Rate

    For example, the VIS of a 17-inch monitor is only about 16 inches. It depends on the useful screen size of CRT and the opening of a monitor's front cabinet.
  • Page 37: Download And Print

    Download and Print This page provides an option to read the manual in .pdf format. PDF files can be downloaded into your hard disk, then viewed and printed with Acrobat Reader or through your browser. If you do not have Adobe® Acrobat Reader installed, click on the link to install the application. Adobe®...
  • Page 38: Troubleshooting

    Check these items Make sure the Power cable is plugged into the power outlet and back of the monitor. Power button in the front of your monitor should be in the ON position. Disconnect the monitor from the power outlet for about one minute.
  • Page 39 Check to make sure Moiré is switched off. Adjust Sync Input. Increase your refresh rate. Refer to the instructions and troubleshooting information in that chapter. Consumer Information Centers RETURN TO TOP OF THE PAGE list to contact your local Philips...
  • Page 40: Regulatory Information

    Hinweis (nur Deutschland) Safety Precautions and Maintenance CE Declaration of Conformity Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards - EN60950:2000 (Safety requirement of Information Technology Equipment) - EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment)
  • Page 41: Commission Federale De La Communication (Fcc Declaration)

    Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device.
  • Page 42: Polish Center For Testing And Certification Notice

    Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three- prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
  • Page 43 North Europe Information (Sweden Country) Placering/Ventilation VARNING: FÖRSÄKRA LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR...
  • Page 44: End Of Life Disposal

    Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer.
  • Page 45 federal regulations. For additional information on recycling contact www.eia.org (Consumer Education Initiative) RETURN TO TOP OF THE PAGE...
  • Page 46: Your Philips F1Rst Choice Warranty

    Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site if your monitor turns out to be faulty or defective.Philips aims at a swap within 48 hours of your call being received.
  • Page 47 In order to avoid unnecessary inconvenience, we advise you to read the operating instructions carefully before contacting the Philips helpdesk. To solve your problem quickly, please prepare the following details before contacting the Philips helpdes Philips type number Philips serial number...
  • Page 48: Your International Guarantee

    In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can be found in the relevant part of this booklet.
  • Page 49 A product that has been modified from the original design. Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
  • Page 50 TO GET WARRANTY SERVICE IN CANADA... Please contact Philips at: (800) 479-6696 One year free parts and one year free labor will be provided at Philips Canada depot or any one of its authorized service centers. REMEMBER... Please record the model and serial numbers found on the product below.
  • Page 51: Consumer Information Centers

    Phone: (02)-6286070 Fax : (02)-6288228 RUSSIA Philips Representation Office Ul. Usacheva 35a 119048 Moscow Phone: 095-937 9300 TURKEY Türk Philips Ticaret A.S. Talatpasa Caddesi No 5. 80640-Gültepe/Istanbul Phone: (0800)-211 40 36 Fax : (0212)-281 1809 Latin America • Bangladesh •...
  • Page 52 ANTILLES Philips Antillana N.V.Kaminda A.J.E. Kusters 4 Zeelandia, P.O. box 3523-3051 Willemstad, Curacao Phone: (09)-4612799 Fax : (09)-4612772 ARGENTINA Vedia 3892 Capital Federal CP:1430 Buenos Aires Phone: (011)-4544 2047 Fax: (011)-4544 2928 BRASIL Philips da Amazonia Ind. Elet.Ltda. Av.Luis Carlos Berrini,...
  • Page 53 PARAGUAY Philips del Paraguay S.A. Avenida Artigas 1513 Casilla de Correos 605 Asuncion Phone: (021)-211666 Fax : (021)-213007 PERU Philips Peruana S.A. Customer Desk Comandante Espinar 719 Casilla 1841 Limab18 Phone: (01)-2136200 Fax : (01)-2136276 URUGUAY Ind.Philips del Uruguay S.A.
  • Page 54 NEW ZEALAND Philips New Zealand Ltd. Consumer Help Desk 2 Wagener Place, Mt.Albert P.O. box 1041 Auckland Phone: 0800 477 999 (Toll Free) Fax:0800 288 588 Asia BANGLADESH Philips Service Centre 100 Kazi Nazrul Islam Avenue Kawran Bazar C/A Dhaka-1215...
  • Page 55 110003 Shenyang P.R. China Phone: 800 820 5128 (Toll Free) Fax:21-65610647 XIAN No. 6-9 yan ta road south part, 710061 Xian, P.R. China Phone: 800 820 5128 (Toll Free) Fax:21-65610647 GUANGZHOU No. 15-17 long kou dong road, tian he district, 510070 Guangzhou, P.R.
  • Page 56 68, Shivaji Marg New Dehli 110 015 Phone: (020)-712 2048 ext 2765 Fax: (020)-712 1558 INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl.Buncit Raya Kav. 99-100 12510 Jakarta Phone: (021)-7940040 7984255 Ext 1612 Fax : (021)-7947511 / 7947539...
  • Page 57 Philips Consumer Service Centre 168-F, Adamjee Road Rawalpindi Cantt Phone: (021)-773 1927 Fax:(021)-772 1167 PHILIPPINES Philips Electronics and Lighting Inc. 106 Valero St., Salcedo Village Makati, Metro Manilla. Phone: (02)-888 0572 , Domestic Toll Free:1-800-10-PHILIPS or 1-800-10-744 5477 Fax:(02)-888 0571...
  • Page 58 SINGAPORE Philips Singapore Private Ltd. Consumer Service Dept. Lorong 1,Toa Payoh., P.O. box 340 Singapore 1231 Phone:6882 3999 Fax:6250 8037 TAIWAN Philips Taiwan Ltd. Consumer Information Centre 26F, 66, Chung-Hsiao W. Road, Sec. 1 Taipei, Taiwan Phone: (02)-2382-4567 ,0800-231-099 Fax:(02)2382-3027 THAILAND Philips Electronics (Thailand) Ltd.
  • Page 59 DUBAI Philips Middle East B.V. Consumer Information Centre P.O.Box 7785 DUBAI Phone: (04)-3353666 Fax : (04)-3353999 EGYPT Philips Egypt Consumer Information Centre 10, Abdel Rahman El Rafei Mohandessin - Cairo, P.O.Box 242 DOKKI Phone: (02)-3313993 Fax : (02)-3492142...
  • Page 60: Protect Your Investment

    Year Mail This Card Today To Get The Most From Your Purchase! ❏ No, I do not want to receive personalized offers about Philips products or other information from Philips in the future. 3135 015 07803 WARRANTY VERIFICATION OWNER CONFIRMATION MODEL REGISTRATION w w w .
  • Page 61: Warranty Registration Card

    PHILIPS Warranty Card 8/16/02 12:38 PM Page 2 !1375415338! 13754-1533 DEPOSIT 1533 Promptly! Open Please MATERIAL TIME-DATED STAMP CLASS FIRST APPLY PLEASE IMPORTANT Warranty Registration Card RETURN THE ATTACHED CARD WITHIN TEN DAYS TO ENSURE YOUR: ✓ Warranty Verification ✓ Owner Confirmation See Inside For ✓...

Table of Contents