HOW TO CONNECT AUDIO SET TO POWER SUPPLY
• It is sufficient only to supply power for upgrade.
• Shown from the right figure, connect yellow line (Battery) and red line (Ignition) to plus and
minus terminal respectively.
• Jack is connected to the audio set via its shapes matched each other.
• We need power supply for operation of audio set (Voltage : 12~15V Current : Over 2A)
Before connection between set and power supply, adjust voltage level to 15V typically
(It is okay up to 12V.)
Power Supply has a variety of shapes and capacity of voltage and current.
At first check these things.
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1-7
LGE Internal Use Only