Summary of Contents for Milwaukee 48228560
- Page 1 OPERATOR'S MANUAL Cat. No. 48228560 1524mm (60") STEEL MOBILE WORK STATION WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: Important Safety Instructions
•Fully assemble the bench according to the as- important information. If unreadable or missing, sembly instructions. Do not leave off any pieces. contact a MILWAUKEE service facility for a free •Do not modify the bench in any way. Use only replacement. -
Page 3: Functional Description
FUNCTIONAL DESCRIPTION Hardware Included NOTE: Items not shown to actual size. Hard- ware Item Description Quantity Screw M4 x 10L Screw 1/4" x 3/4"L Bolt M6 x 15L Washer Bolt M8 x 15L 1. Peg board 2. Tool hanger 11. Tool organizer 3. - Page 4 4. Mount the two rigid casters in the middle of the bench using four bolts (EE) and washers (DD) Cabinet Shelf per caster. Cabinet Shelf Clip NOTE: Begin product assembly close to the final intended location of your bench. This product is heavy and may be difficult to move after assembly.
-
Page 5: Operation
The charger mounts are suitable for holding MILWAUKEE M18™ & M12™ Multi Voltage chargers as well as M18™ chargers. To mount a charger, install a screw (AA) into each boss, then slide the charger's key-hole slots over the screws. -
Page 6: Maintenance
Some of To reduce the risk of injury, contact WARNING these include: gasoline, turpentine, lacquer thinner, MILWAUKEE Corporate After Sales chlorinated cleaning solvents, ammonia and house- Service Technical Support for ALL repairs and hold detergents containing ammonia. Never use replacement parts. -
Page 8: Warranty - Australia And New Zealand
Australia and New Zealand. AUSTRALIA and NEW ZEALAND MILWAUKEE® Service MILWAUKEE® prides itself in producing a premium quality product that is Nothing but Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE®...