Table of Contents
Advertisement
ENGLISH
(Original instructions)
Always direct the airflow in order
to optimise heating. Avoid corners,
small objects and other surfaces
or objects which may impede the
airflow.
The appliance must be positioned
♦
so that the plug is accessible.
Always turn the heater off and
♦
unplug it from the mains before
attempting to move it.
WARNING: Do not place the unit
on or near a hot gas electric burner.
6
Electrical safety
Before use, check that the mains voltage
corresponds to the voltage on the rating plate.
This product must be earthed.
Always check that the mains voltage
corresponds to the voltage on the rating
plate.
♦
Appliance plugs must match the outlet. Never
modify the plug in any way.
♦
Do not use any adapter plugs with earthed (Class
1) appliances. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
♦
To avoid the risk of electric shock, do not immerse
the cord, plug or appliance in water or other liquid.
Extension cables & class 1 product
♦
A 3 core cable must be used as your tool is
earthed and of class 1 construction.
♦
Up to 30m (100 ft) can be used without loss of
power.
♦
If the supply cord is damaged, it must be
replaced by the manufacturer or an authorised
BLACK+DECKER Service Centre in order to avoid
a hazard.
Labels on Appliance
The following pictograms along with the date code
are shown on the appliance:
WARNING: Hot surface
WARNING: Do not cover
Warning!
Before assembling, switch the appliance
off and remove the plug from the socket.
Advertisement
Table of Contents
