Summary of Contents for Yale PURBD51SS1
- Page 1 Instruction Manual PURBD51SS1 Model: BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. KEEP THIS MANUAL IN A SECURE LOCATION.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Read all instructions before using the appliance. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. - Page 3 – catering and similar non-retail applications. • Plug into a grounded 3-prong outlet. Do not remove grounding prong, do not use an adapter, and do not use an extension cord. • It is recommended that a separate circuit, serving only your appliance, be provided.
- Page 4 connections in accordance with state and local codes. A standard electrical supply (115V AC 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required. • Do not kink or pinch the power supply cord of the appliance. •...
- Page 5 amount of coolant in the appliance is stated on the data plate on the back of the appliance. It is hazardous for anyone other than an authorized Service Person to carry out servicing or repairs to this appliance. • Take serious care when handling, moving, and using the appliance to avoid either damaging the refrigerant tubing or increasing the risk of a leak.
-
Page 6: Installation Instructions
- SAVE THESE INSTRUCTIONS - INSTALLATION INSTRUCTIONS Before Using Your Appliance • Remove the exterior and interior packing. • Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. •... - Page 7 Anti-Tip Bracket Installation To reduce the risk of tipping the appliance by abnormal usage or improper loading, the appliance must be secured by properly installing the anti-tip device packed with the appliance. 1. Place the anti-tip bracket on the floor as shown in the figure to the right.
- Page 8 Panel Installation Overlay Panel Dimension: 23.43” Door Panel Width 29.76” Door Panel Height Door Panel Depth 3/4" max Same Panel For Top & Bottom Drawers...
- Page 9 Required Tools: ⚫ Phillips Screwdriver ⚫ 1/8" Drill Bit See pages 8 for overlay panel dimensions before installing. For easy overlay installation, refrigerator door removal is required. 1. Open the drawer and detach the front drawer panel by removing ten Phillips screws.
-
Page 10: Operating Your Appliance
OPERATING YOUR APPLIANCE Recommended temperatures for Chilling Wine: Red Wines: 15 ~ 18°C (59 ~ 64.4°F) Dry / White Wines: 9 ~ 14°C (48.2 ~ 57.2°F) Sparkling Wines: 5 ~ 8°C (41 ~ 46.4°F) • The appliance should be placed where the ambient temperature is between 10~38°C (50~100°F). If the ambient temperature is above or below this range, the performance of the unit may be affected. - Page 11 ECO mode: • Press and hold the button for 3 seconds, it can enter or exit ECO mode. • In this mode, the interior LED light, the compressor indicator and the temperature value on the display panel will be turned off and the ° will illuminate on the upper left corner of °C / °F. LOCK •...
- Page 12 Sabbath mode • Press and hold buttons at the same time for at least 5 seconds to enter or exit Sabbath mode. In this mode, LED will display "Sb". This mode turns off the displays, interior light and prevents them from turning on again.
-
Page 13: Care And Maintenance
CARE AND MAINTENANCE Cleaning Your Appliance 1. Turn off the power, unplug the appliance, and remove all items. 2. Wash the inside surfaces with a warm water and baking soda solution. The solution should consist of about 2 tablespoons of baking soda to a quart of water. 3. -
Page 14: Problems With Your Appliance
PROBLEMS WITH YOUR APPLIANCE You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE REMEDY •...