Table of Contents
Advertisement
16 Quick Disc Playback
AUDIO CD
DVD
1
There are many playback features and options available on Discs. After
familiarizing yourself with the DVD Player, see pages 20 and following to try
additional features.
1
Press STANDBY-ON y y or POWER y y to turn on the DVD
Player.
Turn on your TV. Set it to the correct Video In channel. You
should see the Player's blue DVD screen on the TV (if no Disc is in
the Player).
2
Press OPEN/CLOSE / on the front of the DVD Player to open
the disc tray.
Load your Disc in the tray, with the label facing up. If the Disc
(DVD) is two-sided, make sure the label of the side you want to play
is facing up.
3
Press OPEN/CLOSE / again to close the tray.
4
Playback may start automatically. If not:
• If you are playing a DVD, a Disc menu may appear. If the Title or
Chapter selections are numbered, press a Number button to select
an item. Or, press 341 2 to select an item, then press OK. Playback
will begin. Or, follow the on-screen instructions as detailed in the
DVD Disc menu.
• If you are playing an Audio CD, press PLAY
• If a Video CD has Playback Control, press DISC MENU to access
its menu while playback is stopped. Or, press RETURN/TITLE to see
the menu during playback.
4
Press the Previous
to select an item, then press OK. Follow the instructions provided
by the Video CD. Not all Video CDs have Playback Control. See the
Disc case or menus for details.
5
To stop playback at any time, press STOP
7
If you press STOP
3
you press PLAY
later to restart play.This is known as the Resume
feature.
Resume applies to the last five Discs. Press PLAY
after inserting the Disc in the Player (while you can hear the Disc
spinning and LOADING shows on the TV screen). RESUME PLAY
will appear on the TV screen briefly.
7
If you press STOP
at the beginning of the Disc again if you press PLAY
restart playback.
VIDEO CD
3
to start playback.
¢
, Next
, 3, 4, 1, 2, or Number buttons
7
only once, play will resume at the same point if
more than once to stop playback, play will start
5
.
3
immediately
3
later to
2-3
Helpful Hints
• If the Disc is locked by Parental
Controls, you must enter your
password or unlock the Disc.
Details are on pages 28-30.
• DVDs have a region code.This
Player will play only DVDs of
Region 1 or ALL. Details are on
page seven.
• If there is no activity at the Player
or its remote for 15 minutes, the
Player will turn itself off. Press
STANDBY-ON y on the Player
or POWER y or PLAY 2 on the
remote to turn on the Player
again.
1
4
Advertisement
Table of Contents
