Philips DVP3570 User Manual page 22

Category Menus
Audio Dual mono
Down Sampling
DRC
Effect
Digital Out
• Refer to page 10 for
more information.
Other Auto Power Off
HDMI HDMI
Video
HDMI
Audio
EasyLink
(HDMI CEC)
Ratings Rating
Lock Level
New PIN
Factory Yes
No
Default
Product Info
22 EN
LIST OF SETTINGS
Options/Sub-
Menus
Stereo This unit allows you to select a sound mode.
L-ch
R-ch
• When playing back disc with copyright protection, the sound will be
On
down sampled at 48kHz, even if you set to "Off".
Off
Set to "On" when outputting in 48kHz.
Set to "Off" when outputting the original sound.
On This function is available only on the discs which are recorded in the
7
/ Dolby Digital format.
8
6 /
8
"On" " 7 /
5 /
8
Compress the range between soft and loud sounds.
4 /
8
3 /
8
2 /
8
1 /
8
Off
Normal You can set the reverberation effect.
Living Room Normal:
Hall
Living Room: sounds as if you are in a living room
Arena
Hall:
Cave
Arena:
Concert Hall
Cave:
Bath Room
Concert Hall: sounds as if you are in a concert hall
Cathedral
Bath Room:
Cathedral:
Bitstream • Set to "Bitstream" when the unit is connected to a Dolby Digital decoder.
LPCM • When HDMI cable is connected, make sure "HDMI Audio" setting is
set to "Off" to change the "Digital Out" setting.
"Bitstream":
Outputs a Dolby Digital signals.
"LPCM":
Convert the Dolby Digital into LPCM (2 channel).
On Set to "On" to turn this unit off automatically after 30 minutes of no use.
Off
Auto You cannot select the video resolutions which are not supported by the
480p connected TV, except when this unit's HDMI OUT jack is connected to a
720p
DVI compatible display devices with an HDMI-DVI cable (default is 480p
1080i
in such case).
1080p
• Video and audio signals may be distorted temporarily when switching
Bitstream
to / from the HDMI output mode.
LPCM
HDMI Video:
Off
• Auto: HDMI video resolution will be selected automatically depending
On
on the connected HDMI device. If you want to change the resolution
Off
manually, press [HDMI] repeatedly.
• When you make a selection, the TV monitor temporarily goes blank
and then comes back again. If it does not, press [HDMI] to change the
resolution or press and hold [B (play)] on the front panel for 5 seconds
to change the setting back to its default.
EasyLink (HDMI CEC):
• This feature is available only when the display device is connected with
an HDMI cable, and when it supports EasyLink (HDMI CEC) feature.
• Refer to page 23 for more information.
Off Sets the rating level for the disc playback.
8 [Adult]
7 [NC-17]
6 [R]
5 [PGR]
4 [PG13]
3 [PG]
2 [G]
1 [Kid Safe]
Sets the new password for the "Ratings Lock" setting.
"Yes":
Resets all the settings, except for "Ratings Lock", in "Settings" to the
factory default.
"No":
Does not perform the initialization.
"Product Info" screen provides you with the information on this unit's
hardware and software version information.
Description
- 1 / " "Off":
8 8
no effects (original sound)
sounds as if you are in a hall
sounds as if you are in an arena
sounds as if you are in a cave
sounds as if you are in a bath room
sounds as if you are in a cathedral