Troubleshooting - Philips DVDR890 User Manual

Troubleshooting

Symptom
The display shows 'BAD VERSION' The system version of your DVD recorder is
The display shows 'SYS UNSUPP'.
The display shows 'ERROR' or
'ENGINE ERROR'.
Some of the system settings
have changed, such as the date
or language preferences.
Remedy
already newer than that at the CD-ROM.You
cannot upgrade with this disc.
Upgrading is not supported for this configuration.
Contact your Philips Customer Care Center.
An error occurred during the upgrade
procedure.Try once again. If the problem
persists, contact your Philips Customer Care
Center.
Reset the DVD Recorder as follows: Disconnect
the recorder from the mains; reconnect it while
holding the STANDBY/ON button pressed
until the display lights up.You will need to redo
the installation procedure.
- 8 -