Table of Contents
Advertisement
Problem Areas: Illumination
2. If the ZIF connector or the LEDs of the Sub Board
Assembly is damaged – replace the Sub Board Assembly.
Check:
Inspect the ZIF connector of the Link FPC to the main PBA.
Action:
1. If not properly connected – disconnect and reconnect.
2. If dirty or oxidized – clean it.
2. If the Link FPC is damaged – replace it.
3. Replace Board.
1268-3899 Rev 3
©
Sony Mobile Communications AB – Company Internal
Troubleshooting Guide (mech)
12(44)
Advertisement
Table of Contents
