Advertisement
Preparing to Use Aerophone Pro Editor
Connect the
device to the Aerophone via Bluetooth.
* When using on Android 6.0 or later, please turn Android Location mode on.
Connecting with the Aerophone
1.
Turn the Aerophone on.
The power LED
2.
Place the Aerophone you want to connect close to your mobile
device.
MEMO
5 Make sure that the Bluetooth LED (blue) on the Aerophone is lit. If the LED is
off, the Bluetooth function has been turned off. Set
[MENU]
the
5 If you have more than one Aerophone unit, power-on only the unit that you
want to connect (turn off the power of the other units).
3.
Turn on the Bluetooth function of your mobile device.
NOTE
Do not tap the "AE-30" indication that appears in the Bluetooth settings of your
mobile device. If you tapped this, temporarily cancel the device registration,
and perform the procedure again from step 1.
"Aerophone Pro Editor"
is lit.
(orange)
button.
app installed on your mobile
"Bluetooth"
Contents
"On"
to
from
Advertisement
