Hotel Mode - Panasonic TH-42LRG20E Service Manual

Hotel Mode

1. Purpose
Restrict a function for hotels.
2. Access command to the Hotel mode setup menu.
In order to display the Hotel mode setup menu,
please enter the following command (within 2 second).
[TV] : Vol.[Down] + [REMOTE] : AV (3 times)
Then, the Hotel mode setup menu is displayed.
Hotel mode
Hotel mode
Initial INPUT
Initial POS
Initial VOL Level
Maximum Vol Level
Button Lock
Remote Lock
Welcome Image
Select
EXIT
Change
RETURN
3. To exit the "Hotel mode" menu press the EXIT
button on remote control.
4. Explain the Hotel mode setup menu.
Off
Off
Off
Off
Off
Off
Off
Off
ITEM
Hotel Mode Select hotel mode ON/OFF
Initial INPUT Select input signal modes.
Set the input, when each time power is switched on.
Selection:
Off/Analog /DVB-C/DVB-T/AV1/AV1S/AV2/
Component/PC/HDMI1/HDMI2
*Off: give priority to the last memory. However, Euro
Model is compulsorily set to TV.
*AVnS/AVnC: only Euro model selectable
* PC:selectable with VGA option
Initial POS Select programme number.
Selection:
Off/0 to 99
*Off: give priority to the last memory
Initial VOL Level Adjust the volume when each time power is
switched on.
Selection/Range:
Off/0 to 100
*Off: give priority to the last memory
Maximum VOL Adjust maximum volume.
Level Range:
0 to 100
Button Lock Select local key conditions.
Selection:
Off/SETUP/MENU/ALL
*Off: altogether valid
*Setup: only F-key is invalid
(Tuning guide (menu) can not be selected.)
*MENU: only F-key is invalid
(only Volume/Mute can be selected.)
*All: altogether invalid.
Remote Lock Select remote control key conditions.
Selection:
Off/SETUP/MENU
*Off: altogether valid
*Setup: only Setup menu is invalid
MENU: Picture/Sound/Setup menu are invalid
Welcome Image The Welcome Image is displayed for approximately
5 seconds by turning on the main power of the TV,
or turning the power ON using the remote control.
Set the Welcome Image On/Off:
*Display "Hotel Mode"
*Select "Welcome Image"
*Select "On" or "Off"
*Press OK
17
Function