M-Module Specification Compliance
Capabilities
HP E2261A Specifications
Carrier Interface
Specifications
Power Requirements:
Cable Driving Capability:
Standard M-Module
Compliance:
M-Module Current:
HP E2261A Specifications
The HP E2261A supports:
•
A08, D16 accesses
•
INTC interrupts
•
IDENT capability
Note: Because of the HP E2261A's thickness, it is not guaranteed to fit in a
non-HP M-Module carrier.
The following list describes the HP E2261A's serial communication
capabilities:
•
Four full-duplex (asynchronous) RS-232 Data Terminal Equipment
(DTE) ports on one M-Module.
•
13 independently programmable Baud Rates for each port: 75, 110,
150, 300, 600, 1200, 1800, 2000, 2400, 4800, 9600, 19200, 38400.
•
Independently programmable handshake modes: RTS/CTS hardware
handshake, XON/XOFF software handshake, or none.
•
Independently programmable data format: 5 to 8 data bits plus
polarity; odd, even, or no parity; 1, 1.5, or 2 stop bits.
•
2kByte input and output buffer for each port.
The HP E2261A incorporates the standard 40-pin, 20x2 row connector
interface to the carrier board for power and data/control, but does not have
the 24-pin optional connector for carrying user-connections back onto the
carrier board.
50ft. with standard cable.
IDENT, A08, D16, INTC
+5Vdc @ 0.1A
±12Vdc @ 0.01A
Appendix A
HP E2261A Specifications
89