Table of Contents
Advertisement
1.3 Starting Up
Turn the device on and off
To turn on the device, press the POWER button. When you turn on
the device for the first time, you are asked to complete a calibration
process. For more information, see "Calibrate the device" in this
chapter.
To turn off the device, press POWER again.
Note
Pressing POWER turns off your device temporarily and switches the
device to sleep mode.
Calibrate the Device
Calibrating the device screen involves tapping with the stylus the
center of a cross as it moves around the screen. This process ensures
that when you tap the screen with your stylus, the tapped item is
activated.
If your device does not accurately respond to screen taps, follow these
steps to re-calibrate it:
1.
Tap Start > Settings > System tab > Screen.
2.
On the General tab, tap Align Screen, and follow the instructions
on the screen.
|
Getting Started
17
Advertisement
Table of Contents
