Cold Boot - Pharos PTL600 Hardware User Manual

Cold boot method
Hold the "Power Button" of the GPS Phone 600 with one hand while using the
stylus tip to push in the "Reset Button." Simultaneously release both the
"Power Button" and "Reset Button"
Appropriate situation
If a previous reset has already been attempted and the GPS Phone 600 is still unable
to maintain normal operations, has no response, or if the screen is frozen.
Before executing the preceding "Cold boot method", please carefully consider the
following instructions and then decide on the cold boot method.
1. After a cold boot is performed, if no buttons are pressed, the result is identical
to the reset result.
2. If a previous reset has already been attempted but the GPS Phone 600 is still
unable to maintain normal operation, consider the following solution: After
cold boot, hold the End Button
600 until the system inquiry screen is shown, and then release the End
Button. Next, please read thoroughly through the instructions on cold booting
before continuing.

Cold Boot

on the bottom right of the GPS Phone
22