Table of Contents
Advertisement
PAD Mounting
A Split Rooftop Unit can be installed on a pad provided and installed by others.
Provide a level concrete slab that extends a minimum of 6 inches (150 mm) beyond unit cabinet.
Figure 16: RTU - Installed on Pad.
• Ensure that the pad is designed to handle the weight of the unit. If the pad doesn't have sufficient strength, the unit will fall and cause phys-
ical injury or death.
• Ensure that the chosen location has enough strength to support the weight of the unit(s). If it does not have sufficient strength, the unit(s)
will fall and cause physical injury or death.
• Install the Split Rooftop Unit to protect against extremely high winds and earthquakes. Any deficiency in installation will cause unit to fall,
resulting in physical injury or death.
INSTALLATION GUIDELINES
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
29
Advertisement
Table of Contents
