Smart Feature; Presence Detection; Sitting Reminder; Distance Warning - Lenovo ThinkVision T24mv-30 User Manual

Smart Feature

Presence Detection

Sitting Reminder

Distance Warning

This section describes how to use the Smart Features of this monitor�
The screen will dim when it is detected that the user is away� The screen will be turned off
gradually 10 seconds after the function is triggered� The power indicator will start blinking every
0�5 seconds
Fast / Normal / Slow: Refers to the response speed from when the user is away to when the screen
starts dimming
Presence Detection: After "Presence Detection" is enabled, the monitor can detect whether the user
is sitting in front of the monitor� The backlight will be turned off if the user is not sitting in front of
the monitor�
Note: 1� The optimal distance between the user and the front of the monitor is 300 - 1,000 mm
(about 12 - 40 inches)
2� The sensor might not work correctly due to bright lights�
3� The sensor might be triggered by the material of some chairs�
4� Do not touch the fingerprint, scratch, or damage of the sensor, which might affect the
performance of the sensor� ESD might affect the normal operation of the sensor�
Approach
The monitor can detect how long the user has been using itself� If the user enables this feature, a
prompt icon will appear on the upper-left corner of the screen every 20 minutes when the user is
using the monitor� The icon blinks at the frequency of 1 second for 20 seconds�
The monitor can detect the distance between the user and itself� When the distance reaches a specific
range, a prompt icon will appear on the upper-left corner of the screen� The icon blinks at the frequency
of 1 second for 20 seconds� The prompt will continue if the distance remains unchanged
Leave
Chapter 2� Adjusting and Using your monitor 2-8