Advertisement
Connecting your Camera
IMPORTANT! To avoid installation problems, please install the software first before connecting the camera to
your PC. You will prompted to Restart your computer during this installation so please close and save all work
before inserting the TravelCam software CD.
Camera Software Installation:
1.
Insert the CD into your CD-ROM drive. The Setup Wizard will appear on your computer screen.
2.
Follow the on-screen instructions to complete the software installation.
Note: If the Setup Wizard does not display. Click Start and select Run. Type D:\Setup and press Enter, where D: is the drive
designation of your CD-ROM drive. Follow the instructions above to complete the installation.
Your camera features intelligent USB interface technology that guarantees a simple installation process. The dynamic "Plug &
Play" function provides automatic detection of your camera. After installing the TravelCam software correctly, you will be able
to unplug and re-connect your USB camera at anytime without having to reinstall the camera device drivers.
1.
Insert the USB connector into you TravelCam USB port on your computer.
2.
Turn on your camera and switch the camera to PC mode.
Connect the other end of the USB cable to an available USB port.
3.
Using your camera as a USB PC Camera:
Aside from taking pictures, you can also use your camera as a video camera for your PC. Once the camera software is installed
in your computer, connect the camera to your computer and launch the video capturing software installed in on your PC.
Note: For instructions on how to use each of the bundled software applications including video conferencing capabilities please
refer to the respective Help files within the software applications.
4
Advertisement
