Download Print this page

Samsung MCM-D211UN Installation Manual page 45

Hide thumbs Also See for MCM-D211UN:

Advertisement

Error on a sensor
Error on the detachment of Universal Comm. Kit heat exchanger EVA IN sensor
Outdoor unit display
Description
Reason
1. Description
‐ In Cool mode
Tcond, out-Tair, out > 3°C
Tair, in-TEVA, in > 4°C
Tair, in-TEVA, out > 4°C
Indoor unit operation or thermo ON
during operation of a compressor
Error message
2. Checking method
‐ After checking the detachment status of Universal Comm. Kit heat exchanger EVA IN sensor, assemble
the sensor.
Error on the detachment of Universal Comm. Kit heat exchanger EVA OUT sensor
Outdoor unit display
Description
Reason
1. Description
‐ In Cool mode
Tcond, out-Tair, out > 3°C
Tair, in-TEVA, in > 4°C
Tair, in-TEVA, out > 4°C
Indoor unit operation or thermo ON
during operation of a compressor
Error message
2. Checking method
‐ After checking the detachment status of Universal Comm. Kit heat exchanger EVA OUT sensor, assemble
the sensor.
• Wired remote controller will display the same error shown in the outdoor unit.
NOTE
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 45
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 45
xxx
(xxx: Address of an indoor unit with an error)
Refer to the description below.
Detachment of indoor heat exchanger EVA IN piping sensor
Error on the detachment of indoor unit heat exchanger EVA IN sensor
xxx
(xxx: Address of an indoor unit with an error)
Refer to the description below.
Detachment of indoor heat exchanger EVA OUT piping sensor
Error on detachment of indoor unit heat exchanger EVA OUT sensor
OK
NO
NO
OK
OK
OK
NO
OK
2023-01-13 오전 11:35:19
2023-01-13 오전 11:35:19
45

Advertisement

loading