Xm Radio Activation; Xm Radio Operation - Dual iplug XDMR7710 Installation & Owner's Manual

XM Radio Activation

Activating Your XM Receiver

XM Radio Operation

Basic Channel Selection
Direct Channel Selection
10
Get user manuals: See SafeManuals.com
XDMR7710 OPERATION
1. Press MODE to select XM Radio.
(when connected) 2. Verify channel 1 (XM Preview Channel) is playing.
3. Select Channel 0. The XM receiver's eight character Radio
ID number will appear on the XDMR7710 display.
The Radio ID number is also located on the XM receiver
unit (sold separately).
4. Record the number here for future reference:
5. Activate your XM Satellite Radio service.
To subscribe, log onto http://www.xmradio.com/activation
or call 1-800-967-2346.
Note:
You will need to keep your XDMR7710 turned on for at least
one hour after requesting activation to receive the full
channel line-up.
Tuning Modes
Press BAND to select between XM DIRECT, XM1 and XM2
bands.
Press TUNE
next available channel. Press and hold to advance quickly.
Press BAND to select XM DIRECT channel entry band.
"DIRECT" will momentarily appear in the display. Enter
the desired channel using buttons 1-0, then press FUNC for
3 seconds to confirm the selected channel. If the channel is
not available, the current channel will be retained.
Category Recall Press FUNC once to display the category of the currently
selected channel for 10 seconds. The CATEGORY icon will
appear on the display.
nn ll
or TUNE momentarily to select the