Using The Recording Menu (Rec Menu); Changing The Recording Mode - Sanyo ICR-EH800D Instruction Manual

Using the recording menu (REC MENU)

Changing the recording mode

You can change the sound quality for
microphone recording or line-in recording.
This allows you to provide the best sound
quality for the particular purpose.
Turn on the power. From the
1
basic screen, press the MENU/
PLAY LIST button.
Press the VOL (+/–) button to
2
select "REC MENU", and then
press the
Press the VOL (+/–) button to
3
select "REC MODE", and then
press the
Press the VOL (+/–) button
4
or / button to select a
recording mode, and then press
the /OK button.
A
【REC MODE】
<128kbps 44.1kHz>
MP3
320 128
192 64
/OK button.
/OK button.
ST
PCM
32
44.1
PCM 44.1kHz
320kHz
192kbps
128kbps
MP3
64kbps
32kbps
• PCM uses non-compression in recording of
all audio data while MP3 uses compression
in recording. If you increase the sound
quality, this will also increase the data size,
thus reducing the possible recording time.
Therefore, consider whether sound quality
or possible recording time should take
priority, and then select the appropriate
recording mode.
Recording mode and possible
recording time (page 133)
Press the MENU/PLAY LIST button
to exit the menu.
• The selected recording mode appears on
the screen.
If 128kbps
is selected
SD
A
MIC
MP3 128 k
A
REC REMAIN TIME
16
FLAT
High quality
recording
Standard
sound quality
Long
recording
ST
1/1
0 00
m s
25 45
h
m s
87