Step 2: Connect The Digital Camera To Your Computer - Sanyo Xacti VPC-503 Owner's Manual

Step 2: Connect the digital camera to your computer

1. Rotate the mode dial to
the power switch.
2. Press the four-way controller ( ) to select the [Set-up2] menu,
then use the four-way controller ( ) to select [USB Mode].
3. Press the button.
4. Use the four-way controller (
the button.
5. Connect your camera and the computer via the supplied USB
cable.
6. Position the digital camera steadily on top of your computer
or use a tripod.
monitor
EN-62
and turn your camera on by pressing
) to select [PC CAM], then press
USB Mode USB Mode USB Mode
PC PC PC
PictBridge PictBridge PictBridge
PC CAM. PC CAM. PC CAM.
Cancel : MENU Cancel : MENU Cancel : MENU
Select : Select : Select :