Iso Sensitivity - Sanyo Xacti VPC-CA6 Instruction Manual

ISO SENSITIVITY

With the initial settings, the ISO sensitivity is automatically set according to
the brightness of the subject. However, the ISO sensitivity can be set to a
fixed setting.
1
Display PAGE 2 of the RECORDING MENU (page 56).
2
Select the ISO sensitivity menu.
t: Sets the ISO sensitivity automatically (equivalent to ISO50 to 200
[video clip shooting mode: ISO450 to 3,600]).
*: Sets the sensitivity to ISO50 equivalent
(video clip shooting mode: ISO450).
u: Sets the sensitivity to ISO100 equivalent
(video clip shooting mode: ISO900).
v: Sets the sensitivity to ISO200 equivalent
(video clip shooting mode: ISO1,800).
w: Sets the sensitivity to ISO400 equivalent
(video clip shooting mode: ISO3,600).
3
Select the desired icon from the ISO sensitivity menu, and press the
SET button.
h This completes the ISO sensitivity setting.
HINT
i By setting a higher ISO sensitivity, you can set higher shutter speeds and
capture images in darker locations, but noise in the captured images may
increase.
CAUTION
Does the image appear to flicker when recording a video clip?
i If recording a video clip under fluorescent lights with the ISO sensitivity set
to w, a noticeable flicker may appear in the image.
76
English