Adjusting The Projector - ViewSonic PJD6210-WH User Manual

Adjusting the Projector

Adjusting the Projector Height
The projector is equipped with two tilt-adjustment feet to adjust the image height.
To level the image on the screen, turn the tilt-adjustment feet to fine-tune the height.
Adjusting the Projector Zoom and Focus
1. Focus the image by rotating the focus ring. A still image is recommended for focusing.
2. Adjust the image by sliding the zoom ring.
ViewSonic
Tilt-adjustment feet
To avoid damaging the projector, make sure that the tilt-adjustment feet are
fully retracted before placing the projector in its carrying case.
Zoom ring
Focus ring
6
PJD6210/PJD6210-WH/PJD6210-3D