SECTION 3 - CHASSIS OVERVIEW
OVERVIEW
The primary circuits contained in the AZ2-F chassis consists of a Main Board (designated as the BATL board), Power Supply Board (designated
as the G4 for the 40" models, G6 for the 55" and 60" models, and the G7 used only in the 55" and 60" models), the 3D IR Emitter (HEM2 Board),
Wireless LAN Card, the Switch Unit, the IR Board (HLT2 Board), and the LCD Panel assembly.
NOTE: For connector part number information, refer to
52.
KDL-40NX725/55NX725/60NX725
"Connectors" on page
G4BW
SWITCH
UNIT
HEM2
FIGURE 3-1. BOARD LAYOUT FOR KDL-40NX725 ONLY
49. For Wire Dressing information, refer to
BATL
LD
WIRELESS
TCON
LAN CARD
HLT2
CAMERA MODULE
"Wire Dressing" on page
18