Table of Contents
Advertisement
Congratulations on your purchase of ViewSonic ePoster. Please read carefully and follow all
instructions in the manual before first use. The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION:
1.
Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
2.
To prevent injury, this apparatus must be securely attached to the floor/wall in
accordance with the installation instructions.
Chapter 1 Introduction
1.1 System profile
ViewSonic multimedia ePoster can play all kinds of multi‐media files. To facilitate customers' jobs,
most of the operations can be well‐established via remote control.
To new users:
Before enabling the ePoster, please ensure to plug in the power cable and insert memory card
properly. After the ePoster is on, it will play automatically. If there is no program in memory card, it
will display the main menu or startup picture.
Attention:
1.
Do not change any default setting when unnecessary.
2.
Copy all media files under the root directory in memory card, and delete the files that are not
used to play.
3.
Keep the product far away from water when installing and configuring.
4.
Notes for CF card: before inserting CF card turn off the power, aligning the contact pins, do not
insert with over strength, otherwise it will bend the pins and may burn off the decoder board or
driver board.
1.2 System description
Adopting signal‐chip 1080P solution combined with decoder and driver, the system is
stable and reliable with long time work. It supports to read, decode and play AV files from flash
disk and other memory cards. It also supports AV signal input. This device has the function of
multi ad player and monitor.
1.3 Attention about CF, SD, USB usage
1.
SD and CF card can't be used at the same time.
EP46/EP52/EP55 Series
ViewSonic
2
Hide quick links:
Advertisement
Table of Contents
