ViewSonic CDP6530 User Manual page 30

• Refer to page 40 for more information on all supported signal source types and resolutions in
PIP mode.
Video Source
• Selects an input source for the LCD monitor to display.
• Press ENTER, and then the  or  button to change selection.
Auto Adjustment
• Use this function to let the LCD monitor automatically adjust the screen size, horizontal position,
vertical position, clock frequency and phase.
• Press the ENTER button to execute this function.
Note: This item is only available for the VGA and YPbPr inputs.
Clock Frequency
• Adjusts the clock frequency of the PC or YPbPr input image.
• Press the  button to expand the width of the image on the screen to the right, or the  button to
narrow the width of the image on the screen to the left.
Note: This item is only available for the VGA and YPbPr inputs.
Phase
• Improves focus, clarity and image stability of PC or YPbPr input image by increasing or decreasing
this setting.
• Press button to increase the setting, or  button to decrease the setting.
Note: This item is only available for the VGA and YPbPr inputs.
H.Position
• Controls Horizontal Image position of PC input image within the display area of the LCD monitor.
• Press the  button to move the screen image to the right, or the  button to move the screen image
to the left.
Note: This item is only available for the VGA input.
V.Position
• Controls Vertical Image position of PC input image within the display area of the LCD monitor.
• Press the  button to move the screen image up, or the  button to move the screen image down.
Note: This item is only available for the VGA input.
Ambient Light Sensor
• Choose to adjust the sensitivity or disable the ambient light sensor of the monitor.
• Press ENTER, and then the  or  button to select OFF, HIGH or LOW.
Blue Screen
• Turns on or off the blue screen function. If turned on, a blue screen will be displayed when no input
signal is detected by the LCD monitor.
• Press ENTER, and then the  or  button to turn this function on or off.
Auto Detection
• Choose to let the monitor detect and display available signal sources automatically.
• Press ENTER, and then the  or  button to turn this function on or off.
28