僅 Intelligent Speed Limit Warning Malfunction And Limitations - Kia Stinger 2022 Owner's Manual

Driving your vehicle
WARNING
僅 If the offset value is set greater than
'0', the vehicle will drive above the
road speed limit. In order to drive
below the speed limit, set the offset
value below '0' or use (-) switch on the
steering wheel to slow the vehicle
down.
僅 The vehicle could be driven above the
speed limit after the Set Speed is
equal to the road speed limit. If neces-
sary, the driver could control the
brakes to slow down.
WARNING
Change Set Speed function will not
operate when the road speed limit is
below 30 km/h(20 mph).
Intelligent Speed Limit Assist works
using the speed unit in the instrument
cluster set by the driver. If the speed unit
is set to a unit other than the speed unit
used in your country, Set Speed Auto
Change function may not operate prop-
erly.
NOTICE
僅 For more instructions related to Man-
ual Speed Limit Assist, refer to "Man-
ual Speed Limit Assist (MSLA)" on
page 5-96.
僅 For more instructions related to Smart
Cruise Control, refer to "Smart Cruise
Control (SCC) (if equipped)" on page
5-113.
5 102
Intelligent Speed Limit Assist (ISLA)
Intelligent Speed Limit Warning
malfunction and limitations
Intelligent Speed Limit Warning
malfunction
OCK050311R
僅 The warning message appears for a
few seconds, when Intelligent Speed
Limit Assist does not properly operate.
After the message disappears, the
master warning light will appear.
僅 In this case, have the function
checked by a professional workshop.
Kia recommends to visit an authorised
Kia dealer/service partner.
Intelligent Speed Limit Warning
disabled
OCK050312R