Rear Panel - Peavey Feedback Ferret D Operating Manual

Rear Panel

15 16
AC Power
15
This is a standard IEC power connector. A mains cord with the appropriate AC plug and ratings for the
intended operating voltage is included. The mains cord should be connected to the unit before plugging
into a suitable AC outlet.
Fuse
16
Domestic: 1 Amp Slow-Blow
Export: 500 mA Time Delay
Power Switch
17
This switch supplies AC mains power to the internal power supply. When the unit is functioning‚ the
Power LED on the front panel will illuminate.
Front Panel Disable Switch
18
When the Disable switch is engaged‚ all buttons on the front of the unit are disabled. Use this switch to
prevent accidental changes to your settings once you've set up your system.
Power-Up Recall
19
This button determines‚ upon powering up‚ whether the unit recalls the last settings used or preset 1.
Outputs
20
1/4" TRS balanced audio outputs
[tip = positive; ring = negative; sleeve = ground]
XLR balanced audio outputs
[pin 1 = ground; pin 2 = positive; pin  = negative]
unbalanced
[tip = positive; sleeve = ground]
Inputs
21
XLR and 1/4" combo jack, 1/4" TRS balanced audio inputs
[tip = positive; ring = negative; sleeve = ground]
XLR balanced audio inputs
[pin 1 = ground; pin 2 = positive; pin  = negative]
unbalanced
[tip = positive; sleeve = ground]
17 18 19 20
10
21