Upi Configuration - Gigabyte R183-S93-AAC1 User Manual

5-3-3 UPI Configuration

Parameter
UPI General Configuration
Description
Press [Enter] to configure advanced items.
UPI Status
Š
– Press [Enter] to view the Uncore status.
Link Frequency Select
Š
– Selects the UPI link frequency.
– Options available: 12.8GT/s, 14.4GT/s, 16.0GT/s, Auto, Use Per Link
Setting. Default setting is Auto.
SNC
Š
– Enable/Disable Sub NUMA Cluster function.
– Options available: Auto, Disable, Enable SNC2 (2-clusters), Enable
SNC4 (4-clusters). Default setting is Auto.
Stale AtoS
Š
– Enable/Disable Stale A to S directory optimization.
– Options available: Disable, Enable, Auto. Default setting is Auto.
LLC dead line alloc
Š
– Enable/Disable fill dead lines in LLC.
– Options available: Disable, Enable, Auto. Default setting is Enable.
MMIO High Base
Š
– Options available: 56T, 40T, 32T, 24T, 16T, 4T, 2T, 1T, 512G, 3584T.
Default setting is 32T.
BIOS Setup
- 77 -