U-Line UMCR014-BC01A User Manual & Service Manual page 14

USER GUIDE
3. Remove plastic plug on top of door and save for re-
installation on opposite side.
4. Relocate plastic bushings on top and bottom of door to
opposite side. Clean out bushing hole in door bottom
with a screwdriver if necessary.
Hinge
Plastic
Hole Plug
Screw
Right Side
Door Swing
Right Side Invert
Hinge Screw
Install top hinge:
1. Remove pivot screw from top hinge, invert screw and
reinstall pivot screw in top hinge.
2. Lift the door onto the bottom hinge.
3. Align edge of the hinge with the outer edge of the
unit.
4. Tighten three screws.
5. Insert plastic plug in opposite end of door.
Install grille if applicable.
Align and adjust the door:
Align and adjust the door (see DOOR ALIGNMENT AND
ADJUSTMENT)
Door Adjustments
Plastic
Hole Plug
Left Side
Door Swing
Invert
Hinge
14