JVC HA-NP35T User Manual

Download this manual

1/19/23, 11:36 AM

When in Trouble

Restoring the settings to the initial state

If no sound is heard from one side of the earphones or the earphones cannot be

connected to your BLUETOOTH device, restoring the settings of earphones to the

initial state may solve the problem.

Information of all the paired devices will be deleted (initialized). Perform pairing

again from the start.

Start by deleting the registration information of this unit from the BLUETOOTH

setting on the BLUETOOTH device. Charge the charging case.

Insert the L and R earphones into the charging case.

The earphones are charged and the L and R indicators light up.

Press and hold the L touch sensor area for about 15 seconds until

the L indicator flashes twice.

https://manual3.jvckenwood.com/accessory/headphones/contents/ha-np35t/en/YRWWSYymkvhtrf.php

Restoring the settings to the initial state | HA-NP35T | User manual

> Restoring the settings to the initial state

1/3

Page 1 1/19/23, 11:36 AM Restoring the settings to the initial state | HA-NP35T | User manual > When in Trouble > Restoring the settings to the initial state Restoring the settings to the initial state If no sound is heard from one side of the earphones or the earphones cannot be connected to your BLUETOOTH device, restoring the settings of earphones to the initial state may solve the problem.
Page 2 1/19/23, 11:36 AM Restoring the settings to the initial state | HA-NP35T | User manual After the indicator has flashed, the earphone is charged and the indicator lights up. If the indicator does not flash, repeat step 2 from the beginning.
Page 3 1/19/23, 11:36 AM Restoring the settings to the initial state | HA-NP35T | User manual The settings are restored to the initial state (factory default). When the L and R indicators flash quickly, the earphones are now ready for device pairing. Pair the earphones with a device.