Table of Contents
Advertisement
Step-by-step installation
The installation procedure may differ depending on the model.
STEP 1 Select a location
NOTE
• If you are replacing an old dishwasher, check the existing connections for compatibility
with the new dishwasher and replace the connections as needed.
• You may need to cut a hole in the opposite side of the cabinet according to the location
of the electrical outlet.
DW60BG750FSL_SA_DD68-00250K-00_EN.indd 15
DW60BG750FSL_SA_DD68-00250K-00_EN.indd 15
A
B
Select a location that meets the following
conditions.
• The location must have a solid floor
that can support the weight of the
dishwasher.
• The location must be near a sink with
easy access to the water supply, drain
system, and electrical outlet.
• The location must let you load dishes
into the dishwasher easily.
• The location must have sufficient space
for the dishwasher door to open easily
and provide enough space between the
dishwasher and the cabinet sides.
• The rear wall must be free of
obstructions.
Installation in a new location
If you install the dishwasher in a new
location, follow these instructions before
installing the dishwasher.
1. Using a hole saw, cut a hole into the side
of the cabinet that holds the sink (A).
2. If the base inside the sink cabinet is
raised above the kitchen floor and is
higher than the connections on the
dishwasher, make a hole in the base
inside the cabinet and in the cabinet
side (B).
English
15
2022-12-27 오후 5:17:27
2022-12-27 오후 5:17:27
Advertisement
Table of Contents
