Table of Contents
Advertisement
Connecting the Power
HDMI IN
DP IN
SERVICE
DC 19V
1
Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 19V port
on the back of the product.
‒ Rated power consumption for adapters differs depending on the model. Use an adapter that meets
the power consumption specification of the model.
2
Next, connect the power cable to the power outlet.
3
Press the 5-Way button at the bottom of the product to turn it on.
― The input voltage is switched automatically.
Tidying Up the Connected Cables
1
1
Connect the corresponding cables.
3
1
Put both cables in the cable holder on the stand
(HOLDER-STAND CABLE) to organise the cables,
as shown in the figure.
Assembly is complete.
2
Pull the right side of the HOLDER-STAND CABLE
to remove from the stand. The left side of the
HOLDER-STAND CABLE can be damaged when
pulled forcibly.
18
Advertisement
Table of Contents
