Advertisement
G L O B A L M U T E
A press of
will start the global mute sequence,
and a quick double press will start the global unmute
sequence. Colour is used to differentiate between mute
and unmute. White representing a mute operation, and
green an unmute.
All paired devices will
be muted/unmuted.
The corresponding
channel LED will flash
white/green while the
communication is in
progress.
If some paired devices are unreachable, they
may not successfully mute. If this happens,
the corresponding channel LED will alternate
between white/green and red.
When communication
was successful, the
channel LED's will
turn to a solid white/
green to indicate the
channel has been
muted/unmuted.
D E V I C E O P T I O N T O G G L E
From idle, Press OK to enter channel
browsing mode, double press the
power button to toggle the paired
device's 'Device Option'.
The effect of this toggle depends on
what type of device is paired to that
channel. Below is a generalisation of
products and the associated effect.
DEVICE TYPE
EFFECT
Bite Alarms
Toggle IQ Port On/Off
Light Devices
Toggle the Main Light On/Off
Toggle the device between
Motion Sensors
Standby and Active
When communicating, the Channel LED and the Device
Option LED flash to indicate the channel selected,
and the state that is sending. When communication is
completed, the PIR will go back to channel select mode,
and indicate the new state of the Device Option Toggle
with a green or red colour.
Advertisement
