Page 1
SINGLE USB CHARGER Specification of DCUSB-1 / DCUSB-3 single USB charger The DCUSB-1 / DCUSB-3 charger is intended to charge devices like smartphones, MP3 players and other electronic equipment. Before connecting the device, check compliance of the charger with charging parameters of the given device.
Page 2
ASSEMBLY INSTRUCTIONS 1. Remove the glass panel (1) with the label applying a knife or a flat screwdriver in the recess (3). 2. Remove the screw (2). 3. Dismantle the USB charger module (4). 4. Remove the spacer frame (5) from the assembly block (7). Pull away the block tabs or pull the frame tightly to do this.