Nedis TCARF260BK - USB-C Adapter Manual

Table of Contents

Contents

1 Device Description
2 Use
3 Safety
- 3.1 General safety
- 3.2 Electrical safety
4 Cleaning and maintenance
5 Support
6 Documents / Resources
- 6.1 References
- 6.2 Download manual

Device Description

1. USB-C input	Connect a USB-C device or a type-C power adapter to the USB-C input of the device.
2. HDMI output	Connect the cable of the HDMI display to the HDMI output.
3. Router output	Connect the cable of the router to the router output.
4. USB 3.0 output	Connect a USB 3.0/2.0 device to the USB 3.0 output.
5. USB-C male connector	Connect the USB-C male connector to the computer.

Use

Connect the USB-C male connector of the device to the type-C input of the computer (Macbook Pro, Macbook or chromebook).
Connect the HDMI cable to the HDTV and to the HDMI output of the device.
Connect the ethernet cable to the router and to the router output of the device.
Connect a USB 3.0/2.0 device to the USB 3.0 output of the device.
Connect a USB-C power adapter (including PD adapter) or a USB-C device to the USB-C output of the device.

warning Note: The device supports Power Delivery (PD) charging by a PD charger to a maximum of 100W (20V/5A).
warning Note: The device supports Fast Role Swap of PD 3.0. If the PD adapter is plugged out while working on a PD 3.0 device, the device will not be disconnected.

Safety

General safety

Read the manual carefully before use. Keep the manual for future reference.
The manufacturer is not liable for consequential damages or for damages to property or persons caused by nonobservance of the safety instructions and improper use of the device.
Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
The device is suitable for indoor use only. Do not use the device outdoors.
The device is suitable for domestic use only. Do not use the device for commercial purposes.
Do not use the device in locations with high humidity, such as bathrooms and swimming pools.
Do not use the device near bathtubs, showers, basins or other vessels containing water.
Do not use a timer or a separate remote-control system that switches on the device automatically.
Do not cover the device.
Place the device on a stable, flat surface.
Keep the device away from flammable objects.

Electrical safety

RISK OF ELECTRIC SHOCK
DO NOT OPEN

To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
Disconnect the product from the mains and other equipment if a problem should occur.
Do not use the device if the mains cable or mains plug is damaged or defective. If the mains cable or mains plug is damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.
Before use, always check that the mains voltage is the same as the voltage on the rating plate of the device.
Do not move the device by pulling the mains cable. Make sure that the mains cable cannot become entangled.
Do not immerse the device, the mains cable or the mains plug in water or other liquids.
Do not leave the device unattended while the mains plug is connected to the mains supply.
Do not use an extension cable.

Cleaning and maintenance

Before cleaning or maintenance, always switch off the device, remove the mains plug from the wall socket and wait until the device has cooled down.
Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
Do not immerse the device in water or other liquids.
Clean the outside of the device using a soft, damp cloth. Thoroughly dry the device with a clean, dry cloth.
Clean the ventilation openings using a soft brush.