Pandigital DPF56-2 Quick Start Manual

Pandigital Quick Start Guide

Initial Setup

1
Remove the plastic insert
before using the Remote
Control.
View Slideshow from your Memory Source
1
Insert your memory
card or USB Flash Drive
into the appropriate
media slot on the side
of the DPF.
Access HOME Screen
1
Power ON the DPF.
Updated documentation is available on our website: http://www.pandigital.net
2
Plug the power adapter
into a wall outlet and DPF.
2
To select a different memory
A slideshow will begin
source, press EXIT until the
displaying the photos
HOME screen is displayed,
stored on your memory
and then press SETUP.
source.
2
The slideshow will
automatically begin
displaying the photos
stored on the selected
memory source.
CUSTOMER SUPPORT
Call us toll free: 1-800-715-5354
3
Extend the stand on the
back of the frame to the
desired viewing angle.
3
3
Press the EXIT button
on the remote control
or DPF top-back panel
until the HOME screen
is displayed.
4
Power ON the DPF
(switch is on the side
of DPF).
4
Use arrows to highlight
Select Media, and then
press ENTER.
5
A slideshow will begin
displaying the photos
stored in the DPF's
internal memory.
5
Use arrows to highlight
the desired memory source,
(i.e., Internal Memory), and
then press ENTER.
Note: Sources not present
in DPF will not be available
for selection.