Table of Contents
Advertisement
Chapter 17
3. Enable
Link
Aggregation.
Note: Link Aggregation and IPTV/VLAN cannot be enabled at the same time to avoid LAN port conflicts.
4. Select the
Static LAG
aggregation mode for both ends of the link.
5. Click SAVE. The LAN2 and LAN3 ports will be used for Link Aggregation.
Note: If you have set the Port Forwarding, DMZ or DHCP address reservation, and the new LAN IP address is not in the
same subnet with the old one, then you should reconfigure these features.
17 4
Configure to Support IPTV Service
I want to:
Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet
service provider (ISP).
How can I do that?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2 Go to
Advanced
3 If your ISP provides the networking service based on IGMP technology, e.g., British
Telecom(BT) and Talk Talk in UK:
1 ) Tick the
IGMP Proxy
either V2 or V3, as required by your ISP.
or
LACP
mode. It's recommended that you select the same link
>
Network
> IPTV/VLAN.
and
IGMP Snooping
Customize Your Network Settings
checkbox, then select the
IGMP
Version,
110
Advertisement
Table of Contents
