Setting Up
User Interface Setup
You can setup user interface parameters.
1
Press the [FNC] button.
h FUNCTION screen appears.
h
2
Touch [
].
h SETUP screen appears.
h
3
Touch [User Interface].
h User Interface screen appears.
h
4
Set each item as follows.
■
[Beep]
Turns the key touch tone on or off.
Default is "[OFF]".
■
[Language]
Selects a language.
[Time Format]
■
Select the time display format.
"[12-Hour]" (Default)/ "[24-Hour]"
[Clock Adjust]
■
Adjust the date and time manually. (P.6)
38
Special Setup
You can setup Special parameters.
1
Press the [FNC] button.
h FUNCTION screen appears.
h
2
Touch [
].
h SETUP screen appears.
h
3
Touch [Special].
h Special screen appears.
h
4
Set each item as follows.
■
[DEMO]
Set the demonstration mode. Default is "[ON]".
[Software Information]
■
Check the software version of this unit. (P.38)
[Open Source Licenses]
■
Displays the open source licenses.
■
[Initialize]
Touch [Initialize] and then touch [Yes] to set
all the settings to the initial default settings.
Ñ
Software Information
Check the software version of this unit.
1
Touch [Software Information] in the
Special screen.
2
Confirm the software version.