Table of Contents
Advertisement
Installation
Positioning SLEEPsense in Additional Setups
Identify the scenario that is closest to your setup
1. One person in bed
When you're 1 in bed, the best
location is in between your
shoulders in the side where you
usually sleep
2. Two people in bed
a. Bed width less than 140 cm : place the sensor ~20 cm
away from the edge of the bed on your side (i.e. under
the external shoulder)
b. Bed width more than 140 cm : If you tend to stay on
your side of the bed, place the sensor in the middle of
your side. Otherwise try to locate it as close to where
you're sleeping as possible.
c. 2 mattresses in double bed: Place the sensor ~20 cm
away from the edge of the bed. In case of encountering
issues – move the sensor towards the middle.
20
Advertisement
Table of Contents
