Bosch PROFACTOR GNB18V-12 Operating Instructions Manual page 4

4 . Power tool use and care
a . Do not force the power tool . Use the correct
power tool for your application . The correct
power tool will do the job better and safer at
the rate for which it was designed .
b . Do not use the power tool if the switch does
not turn it on and off . Any power tool that
cannot be controlled with the switch is dan-
gerous and must be repaired .
c . Disconnect the plug from the power source
and/or remove the battery pack, if detach-
able, from the power tool before making any
adjustments, changing accessories, or stor-
ing power tools . Such preventive safety mea-
sures reduce the risk of starting the power
tool accidentally .
d . Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool . Power tools are dan-
gerous in the hands of untrained users .
e . Maintain power tools and accessories .
Check for misalignment or binding of mov-
ing parts, breakage of parts and any other
condition that may affect the power tool's
operation . If damaged, have the power tool
repaired before use . Many accidents are
caused by poorly maintained power tools .
f . Keep cutting tools sharp and clean . Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control .
g . Use the power tool, accessories and tool
bits etc . in accordance with these instruc-
tions, taking into account the working condi-
tions and the work to be performed . Use of
the power tool for operations different from
those intended could result in a hazardous
situation .
h . Keep handles and grasping surfaces dry,
clean and free from oil and grease . Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in un-
expected situations .
4
1605A001CD GNB18V-12 202301.indd 4
General Power Tool Safety Warnings page heading
SAVE THESE INSTRUCTIONS
5 . Battery tool use and care
a . Recharge only with the charger specified by
the manufacturer . A charger that is suitable
for one type of battery pack may create a risk
of fire when used with another battery pack .
b . Use power tools only with specifically desig-
nated battery packs . Use of any other battery
packs may create a risk of injury and fire .
c . When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a con-
nection from one terminal to another . Short-
ing the battery terminals together may cause
burns or a fire .
d . Under abusive conditions, liquid may be
ejected from the battery; avoid contact . If
contact accidentally occurs, flush with wa-
ter . If liquid contacts eyes, additionally seek
medical help . Liquid ejected from the battery
may cause irritation or burns .
e . Do not use a battery pack or tool that is
damaged or modified . Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury .
f . Do not expose a battery pack or tool to fire
or excessive temperature . Exposure to fire or
temperature above 265 °F may cause explo-
sion .
g . Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions . Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire .
6 . Service
a . Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts . This will ensure that the safety of
the power tool is maintained .
b . Never service damaged battery packs . Ser-
vice of battery packs should only be per-
formed by the manufacturer or authorized
service providers .
1/9/23 2:07 PM