Approved Combinations Of Cutting Tool, Deflector, Handle And Harness - Stihl FS 45 Instruction Manual

Approved Combinations of Cutting Tool, Deflector, Handle
and Harness
Cutting Tools
1 STIHL AutoCut C 5-2 mowing head
2 STIHL AutoCut 5-2 mowing head
3 STIHL PolyCut 6-3 mowing head
4 STIHL FixCut 5-2 mowing head
Deflector
5 Deflector with line limiting blade for
mowing heads only (see "Mounting
the Deflector")
Handle
6 Loop handle
Harness/Shoulder Strap
7 Shoulder strap may be used
Cutting Tools
1
2
3
4
FS 45
Equipment
The complete trimmer includes:
– Cutting tool
– Deflector
– Handle
– Shoulder strap (special accessory)
Deflector
5
Approved Combinations
Depending on the cutting tool you intend
to use, select the correct combination
from the table below.
Only mowing heads (1, 2, 3, 4) may be
used on loop-handled trimmers with a
curved drive tube.
Handle
6
For safety reasons only those
versions of the cutting tools,
deflectors, handles and harnesses/
straps shown in the table may be
used. Other combinations are not
permitted because of the risk of
accidents.
To reduce the risk of accidents and
injury, avoid contact with the rotating
cutting tool.
Shoulder Strap
7
English
13