Statement Of Conformity; Specific Conditions Of Use - Emerson FB2100 Safe Use Instructions

Emerson FB2100 Flow Computer
Figure 1. Emerson FB2100 Label with UKCA
(Non-sparking with Integral Sensor)
Use this safe use instructions (SUI) document with the
Emerson FB2100 Flow Computer Instruction Manual
D301783X012). For full cautions and descriptions of
installation and troubleshooting procedures, refer to this
manual. If you require training for this product, contact
your local sales office.
The Emerson FB2100 Flow Computer (or "FB2100") with
ATEX/UKCA approval may be ordered with any of the
optional communications or I/O modules listed in the
product data sheet Emerson FB2100 Flow Computer
D301791X012).
Figure 2. Emerson FB2100 Label with UKCA
(Non-sparking without Integral Sensor)

Statement of Conformity

Hereby, Energy and Transportation Solutions declares that
the Emerson FB2100 Flow Computers are in compliance
with the essential requirements and other relevant
provisions of European Directives 2014/30/EU (EMC), and
2014/34/EU (ATEX).
Energy and Transportation Solutions
Safe Use Instructions – Emerson FB2100 Flow Computer

Specific Conditions of Use

Use equipment in an area of not more than pollution

degree 2.
 Make provisions to ensure, in the event of transient
disturbances, that the rated voltage does not exceed
140% of the peak rated voltage.
 Lead acid battery and solar power options are not for
use in ATEX applications.
Impact tests on the display were conducted based on

Group II values for the low risk of mechanical danger,
in accordance with Table 15 of IEC/EN 60079-0 7
Edition. Install flow computers with displays in areas
where the risk of impact is low.
In Zone 2 installations, ensure that the flow computer

is installed and used to prevent the danger of
electrostatic charges.
(part
The FB2100 enclosure requires a tool to open. Refer to

the Physical Security section in
FB2100 Flow Computer Instruction Manual
D301783X012) for further details.
Refer to

(part
Replacement Part
8-Channel Expansion
I/O Board
6-Channel Expansion
I/O Board
HMI Module Display
Assembly
I/O Termination
Board
CPU Enclosure and
Electronics
Sensor
Door Accessories
Relay
Coin Cell Battery
Part D301770X012
Chapter 1
Table 1
for replacement parts.
Table 1. Replacement Parts
Kit Number
400217010-KIT
400215010-KIT
399379-01-0, 621627011-
KIT, 399380-01-0,
621627020-KIT
400210010-KIT,
358807010-KIT
621673-01-0, 621674-01-
0, 621675-01-0, 621676-
01-0, 621678-01-0,
400209010-KIT, 399260-
01-0, 399264-01-0,
400211010-KIT
Variable Kit Number
399291-01-0, 399267-01-
0, 399266-01-0,
621661010-KIT, 399394-
00-0
395828-01-0
395620-03-1
March 2023
th
Emerson
of the
(part
Field
Replacement
Guide
document
number
D301804X012
D301803X012
D301822X012
D301805X012
D301803X012
D301843X012
D301825X012
D301847X012
D301855X012