Reading Heating Consumption - Honeywell Hometronic HCM 200d Operation

Reading heating consumption

The consumption trend is not displayed until 3 months after the
consumption metering unit has been commissioned.
Change to the "Display" submenu as described on Page 39.
►
The following text is displayed:
Turn the Dial button to the left
►
until "Meter readings" is se-
lected:
Press the Dial button.
►
The installed metering units are
displayed for example:
Press the Dial button.
►
The heating cost allocator is se-
lected. The following text is dis-
played:
Press the Dial button.
►
The consumption of all the in-
stalled heating cost allocators is
displayed.
The first line shows the consumption until the last critical date (in
this case, change of year) and under it the current date and the
consumption since the last critical date.
A table of the possible metering unit types and corresponding
units can be found in the appendix on Page 107.
Reading system values
STATUS
SENSOR VALUES
ROOM TEMPERATURES
CONSUMPTION COUNTERS
STATUS
SENSOR VALUES
ROOM TEMPERATURES
CONSUMPTION COUNTERS
HEAT. COST DISTRIB.
HEAT. COUNTERS
HOT WATER COUNTERS
COLD WATER COUNTERS
TOTAL
INDIVIDUAL VALUES
HEAT. COST DISTRIB
01.01.00 54321 AE
30.03.00 18765 AE
Consumption trend
Operation
→
41