I Registering Administrators - Panasonic BM-ET200 Operating Instructions Manual

I Registering Administrators

The following are descriptions of how to register administra-
tors in the stand-alone mode. In the stand-alone mode, reg-
istration of at least one administrator is required. In the fac-
tory default setting, there are no administrators. At the time
of initial setup, surely register an administrator. Up to three
administrators can be registered.
Reader ID:
IP Address:
Subnet Mask:
Gateway IP Address:
Step 1
Start up the web browser.
®
Note: Use Microsoft
operating system
Professional SP2) or Microsoft
SP1 (when the
®
Windows 2000 Professional SP4).
Step 2
Enter "http://192.168.0.3/indexeng.html" in the address box
of the browser.
Step 3
Press the [Enter] key on the keyboard.
→ Administrator registration page will be displayed.
Step 4
Complete each setting item displayed in the frame on the
right of the window.
36
1
192.168.0.3
255.255.255.0
No setting
®
Internet Explorer 6.0 SP2 (when the
®
is Microsoft Windows
®
Internet Explorer
operating system is Microsoft
[User ID]
Enter a user ID.
Available characters for the user ID: Alphanumeric charac-
ters (0-9, A-Z, a-z)
Upper and lower case letters are distinguished.
6 to 16 1-byte characters can be entered.
[Password] [Confirm password]
Enter the password.
Available characters for the user name: Alphanumeric char-
acters (0-9, A-Z, a-z)
Upper and lower case letters are distinguished.
6 to 16 1-byte characters can be entered.
Step 5
Click the [OK] button.
®
XP
The administrator's information is registered. Click [User/
®
6.0
Administrator] button. "User/Administrator" page is dis-
®
played. Then, register users with the operator's privilege.
(Refer to p. 37.)
Notes:
• Take care not to forget the IDs and passwords of regis-
tered administrators, as they are required at the time of
system restoration when the tamper detection function
is activated. We recommend that you note down your
settings and save them.
• When the login page is displayed for the first time, the
installation window to install ActiveX
the installation according to the on screen instructions.
• If the installation window is displayed again even after
the installation is completed, restart the PC.
®
is displayed. Do