Related Manuals for Panasonic AW-VF64N
Summary of Contents for Panasonic AW-VF64N
-
Page 1: Operating Instructions
Operating Instructions 4 CRT Viewfinder AW-VF64N Model No. Before operating this product, please read the instructions carefully and save this manual for future use. F0906Y0 VQTB0132... - Page 2 Safety precautions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- Page 3 Safety precautions WARNING: • TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. • TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, KEEP THIS EQUIPMENT AWAY FROM ALL LIQUIDS. USE AND STORE ONLY IN LOCATIONS WHICH ARE NOT EXPOSED TO THE RISK OF DRIPPING OR SPLASHING LIQUIDS, AND DO NOT PLACE ANY LIQUID CONTAINERS ON TOP OF THE EQUIPMENT.
- Page 4 Safety precautions IMPORTANT SAFETY Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings.
-
Page 5: Table Of Contents
Contents Accessories ... 5 Introduction ... 5 Major operating controls and their functions ... 6 How to install ... 7 Accessories Mounting base ... 1 Mounting base screws ... 2 Introduction This 4-inch CRT viewfinder is designed to be used with a convertible camera (such as the AW-E350, AW-E650, AW-E655, AW-E750 or AW-E860). -
Page 6: Major Operating Controls And Their Functions
Major operating controls and their functions Hood This is used to block extraneous light which, when present, makes it hard to see the screen. The unit comes with the hood already mounted. For details on how to detach the hood, refer to page 9. -
Page 7: How To Install
How to install Mounting to the interface bracket (AW-PB506A, AW-PB305A) Mount the interface bracket on the tripod. (Screw: 1/4 – 20UNC) Mount the camera on the interface bracket (AW-PB506A or AW-PB305A), and turn the fixing knob to tighten the camera securely. -
Page 8: Mounting Base Screws
How to install Mount the mounting base that is supplied to the viewfinder onto the top of the interface bracket using the 2 screws provided. (Mount the base securely so that it is not unsteady.) Slide the viewfinder from the back into ... -
Page 9: How To Detach The Hood
How to detach the hood Loosen the hood fixing screws free. Return the hood fixing screws To re-attach the hood, first loosen the hood fixing screws the front along the slide-in slots. Insert it firmly as far as it will go, and then secure it using the hood fixing screws How to adjust the viewfinder angle To adjust the viewfinder angle, loosen the pan/tilt lock knob... -
Page 10: Appearance
Appearance Unit: inch (mm) 4-1/2 (114) 5-1/16 (128) 6-1/4 (158) - 10 -... -
Page 11: Specifications
Specifications Power requirements: DC 12 V (supplied from camera head) Power consumption: Approx. 9 W indicates safety information. CRT: Video input: Resolution: Internal indicator: Adjustment function: Operating temperature: Ambient operating humidity: Dimensions (WHD): Weight: Finish: Weight and dimensions indicated above are approximate. Specifications are subject to change without notice. - Page 12 PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835...