Table of Contents
Advertisement
Cleaning agent and rinsing agent
Rinsing agent
Rinsing agent is necessary to ensure water
does not cling and leave marks on load
items, and to help load items dry faster after
the final rinse.
The rinsing agent concentration must be
adjusted in the following circumstances:
- If there are spots of water left on load
items after reprocessing, then the
dispensing concentration is set too low.
- If clouding or smearing appears on load
items, the dispensing concentration is set
too high.
The rinsing agent is dispensed in the
rinse
programme stage. The container
needs to be filled for this purpose.
Beer glasses
In the
on the model), the final rinse is carried out
with cold water and without rinsing agent.
Refill indicator
When the fill level in the rinsing agent
container is low, you are reminded to refill
the dispenser container, e.g.:
Fill rinse aid into door dispenser.
Confirm the prompt with OK and top up
the rinsing agent as described.
Fill the dispensing path (see "Machine
functions")
34
Final
programme (depending
OK
Filling the door dispenser
Never add cleaning agent.
This will always destroy the rinsing agent
container!
Only fill the rinsing agent container with
rinsing agent for commercial
dishwashers.
Open the door fully.
Unscrew the yellow lid with
the symbol in the direction of the
arrow.
The container holds approx. 300 ml.
Only add rinsing agent as far as the
"max." mark on the edge of the funnel.
Advertisement
Table of Contents
