Sony SCPH-20401 Installation Manual page 9

4
Fasten the HDD unit to the console.
Using a coin, turn the mounting screws of the network adaptor in a clockwise
direction. Do not overtighten.
Notes
• Do not use a screwdriver to tighten the mounting screws.
• Do not fasten the mounting screws too tightly, as this may damage the screws or console.
Mounting screw
5
Insert the power plug for the console into an electrical outlet.
6
Turn on the console using the main power switch on the console rear.
7
Press the 1 (standby)/reset button on the console front, and wait for the
main menu to appear.
The 1 indicator turns green.
Note
For detailed usage instructions for the HDD, refer to the instruction manual for the internal
hard disk drive (40GB) (for PlayStation 2) and HDD utility disc (ver 1.10).
®
PlayStation 2 console rear
®
US
9