Advertisement
6
Cable management
The models RGB-650CM and RGB-750CM have a cable management which enables to
connect just those cables which are really needed.
This creates a clear view inside the case and improves the air flow which extends the life time of
the components by better cooling.
Connect these wires as per description before. The connection at the power supply side is
labeled and will results automatically by the connector form and size.
If all cables are connected fix them with the cable straps in the case to avoid interferences of
fans or air flow.
7
RGB control
The build-in RGB LEDs can be controlled in two ways:
1.
By switch at the backside of power supply.
Red button
Green button
2.
By external switch.
The power supply has an additional cable with two pin connector. This connector can be
connected to a separate switch (e.g. Reset Switch) or any other switch. A separate switch
is not included.
Please consider, that you still have to switch on the power supply by the red button when
using a separate button for controlling.
3.
The power supply has also a RGB LED 5V Digital connector which can be plugged to a
matching socket on the Mainboard. Then the RGB Lighting of the power supply can be
controlled through the Mainboard. Please read the manual of your Mainboard for this.
To switch to the mainboard mode press the green button for 5 second till the lights flash
once.
Manual Argus RGB-II -Series
Switchs LED On/Off
Switchs the LED mode
14 of 20
07.09.2020
Advertisement
